this means no proper usb connection is established, clean the usb port or try adjusting the cable end at phone!
when it gets connected to ull get it in the log that ur phone is cid53 or not, if u dont get it then post the log here!

lol-> laugh out loud!

Many many thanks.

This is a whole new world for me, and I like it.

I hope to learn much more from you guys in the future.

Anyhow, I found the file which ppg had mentioned.
But I found it somewhere else.
I went to all tutorials from SE Flashing.
And suddenly I saw in the list mentioned: Installing USB Flash Drivers.
I did choose for option no. 3 (Recommended for New users).
And this appeared to be the file which you mentioned before.

And when it was installed, I tried to connect my phone to XS++ again, and it worked.
I pressed first GDFS (on the bottom line), and after that I pressed phone lock (on the top side).
And there it was: 7519. What a stupid code.
Then I disconnected the phone, and then first of all I changed the phone lock into 0000.

There you see that these kind of things work for people like me as well, as long as it goes automatically.

I have so much more to learn.
This is very exiting, Wow.
I think that I would like to join you people, and learn all the things that are possible.
Thank you very much.

Yes, I am mobiliteit.

Bhuvan gave me the link to where it is explained how I can read out what that phone lock code is. And there I have to login as well, you see.

But let me explain something.
I have installed Sony Ericsson PC Suite (which was delivered on a CD with the phone).
And I can connect another W810i mobile phone (which does not have a phone lock) with the PC Suite on the computer. So, therefore I think that I should also be able to connect the phone (which does have a phone lock) to XS++. So, according to what I understand from this, is that the flash drivers must be installed already, otherwise I could not be able to connect my phone to PC Suite. Does that make any sense to you?

Should I just install the flash drivers again?
Can you give me a link, from where I should download them?
And do I have to delete the flash drivers which I already have?

I don’t want to update my phone.
I just want to read out that phone lock code.

But I don’t really understand what you are telling me.
You want me to download from filebase a new setupfile and then install it.
But where is filebase?

And you are giving me antother option as well.
You are telling me to just install SEUS (and not use it for updating my phone).
Do you mean that I can read out the phone lock code with SEUS as well (instead of using XS++)?

I hope that you can help me.
Bye

Please understand that I am not a wizkid with computers.
Therefore, can somebody please guide me through this.
Because I don’t really get it, actually.

And I do beleave that the solution is not very far anymore.

I have checked the Service Menu on my phone.
In there I can see: Software info
A lot of things are written in there.
For instance, I saw DB2010.
So, my phone is a DB2010.
But I cannot see if it is a CID53.

Anyway, I have downloaded XS++ v3.1 (Darwin) Ready !
And I have tried to connect my phone while holding the C button.
But the message which I can see in the frame of XS++ is:
—————————————————————–
Error: Cannot open phone communication port
Disconnected… Unplug the phone
—————————————————————–

I do not know what is going on.
Can you please help me through this.
Thanks a lot.

By the way what does “lol” mean?

if ur phone is cid53 then come back!

I have a Sony Ericsson W810i.
Is that the same as W810?
I think it is, but I would better ask you about it, because I am not so sure about if it really is exactly the same.

The problem with my phone is, that it requires a Phone Lock Code.
And I do not know the Phone Lock Code.
So, I cannot enter into the phone.
Therefore, I would like to do a Master Reset (or Hard Reset) to my phone.
Is it possible just to push some buttons at the same time and make that happen?
Or do I really have to Flash my phone?

because when i tried to flash with SE tools lite 1.11 it got stuck with processing the patch and the box where it asks “apply patch” never came…

I have the correct patch versions and other stuff….

And another stupid question, is it necessary to flash the main firmware every time i flash??

Also do i need to select the main firmware in the box to apply only patch???

Please reply ASAP
thanks in advance
trixon123 at gmail d0t com

Am i missing some thing here?

i have installed usb drivers btw