Comments on: Red Light Blinking, Dead ?

By: Rad Paul

Rad Paul — Fri, 12 Mar 2010 13:54:17 +0000

man i gotta spend 7 thousand buck to repair a 10 thousand phone its crazy didnt you guys like help before ??? and plus i did give it to em the price was to much and i had kept the phone with em for over a week and they hadn’t repaired it then when i got my cellphone back 3 screws r missing so i dont trust em anymore

By: Akshay

Akshay — Thu, 11 Mar 2010 18:31:01 +0000

get it serviced from SE center. no other option these days.

By: Akshay

Akshay — Thu, 11 Mar 2010 18:28:44 +0000

Rad Paul, no, sorry.

By: ALI RAZA

ALI RAZA — Thu, 11 Mar 2010 04:33:17 +0000

HELLO GUYZZZ..
I HAVE INSTALLED SOME NEW GAME TO MY K-790i..
THEN I CHNAGED MY SIM AND TRY TO START STILL IT,S NOT STARTING EVEN NOT FLASHING JUST SHOWING RED LIGHT BLINKING AT INFRAED PORT AND I WANT IT TO CONNECT TO MY PC BUT IT,s NOT RECOCNIZED WHT SHUD I DO?????

By: Rad Paul

Rad Paul — Tue, 09 Mar 2010 07:19:36 +0000

Hey Guys i am back ok now like i told before my cellphone Sony Ericsson W580i is showing me a read light when i try to switch it on from my past research i learn its a Erom problem. So how do i fix it and i donno if its Cid 53 or 52 can please tell me that its fixable

By: Akshay

Akshay — Sun, 07 Mar 2010 19:23:07 +0000

no, flash back actual gdfs, then flash, main, fs. try some other firmweare versions

By: k610i guy

k610i guy — Sat, 06 Mar 2010 17:20:44 +0000

hey akshay, i wonder if you can help me fix my phone. what i did is this: i accidently used a wrong gdfs backup onto my k610i and now it is absolutely dead. the setool unlock/repair no longer helps and i deleted my old gdfs backup in anger =/. the symptoms of the k610i is that the red light blinks once/5 times and wont start up or charge and when identifying on setool it says “IMEI mismatch”. i’ve tried reflashing the whole k610i but when flashing the fs firmware it stops at 32/140. i hope you can help! thanks in advance.

By: k610i guy

k610i guy — Sat, 06 Mar 2010 17:15:26 +0000

oops sry wrong email address send to this one, or put on this page plz

By: k610i guy

k610i guy — Sat, 06 Mar 2010 16:13:32 +0000

hey akshay,
ive tried doing this with my k610i but alas it doesnt work. will my phone ever start again, because what i did was i accidently used a gdfs backup on the k610i from another phone and now its dead. =(. do you have any advice? thanks in advance.

By: Kian Shilton

Kian Shilton — Thu, 25 Feb 2010 18:34:08 +0000

Akshay,
Does This Apply For The ‘BROD’ On The K850i??
If Not What Shall I Do,
Ive Tried Flashin The Main And Fs Btw,
Thankss

By: Akshay

Akshay — Wed, 10 Feb 2010 13:52:53 +0000

ok i sent you a mail, reply.

By: EnRYQuE

EnRYQuE — Tue, 09 Feb 2010 20:09:58 +0000

remeber..it me Lazar_Enrike help me please.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition – please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35463901217291 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Will execute script now.
Writing GDFS var 0001:084E len:015B
Success
Phone detached
Elapsed:65 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35463901217291 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
smth wrong with usercode reset,error is: 1
Elapsed:88 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35463901217291 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Will execute script now.
Phone detached
Elapsed:86 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35463901217291 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
smth wrong with usercode reset,error is: 1
Elapsed:71 secs.

By: luke

luke — Fri, 05 Feb 2010 23:13:15 +0000

i have a satio u1i and i have this problem, i have no 2 and 5 keys to hold tho lol
anyone able to help??

By: spark007

spark007 — Sun, 31 Jan 2010 09:54:21 +0000

hey, akshayy…i m in deep trouble man.. my w910 suddenly turns off and not responding..when turn on, red light blinks & left soft key flashes red three times…. i followed ur erom repair step…but there is some error..

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition – please visit http://www.setool.net and buy FULL.

ChipID:C802,EMP protocol:0401
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
skipping empty loader…
Can’t load ID loader !
Elapsed:5 secs.

but with a2 uploader it takes flash perfectly…even i can access fs through that..but…it neither turns on. i chcked my battery & charged fully but nothing happened, same problem..red light blinks & left soft key flashes red three times what can i do man. give me sum suggesitions man…

By: -N-e-V-s-

-N-e-V-s- — Tue, 26 Jan 2010 12:50:58 +0000

has cid53 dead phone’s issue beend fixed?

By: andy

andy — Thu, 21 Jan 2010 01:37:59 +0000

abaker1026@yahoo.com

By: andy

andy — Thu, 21 Jan 2010 01:36:20 +0000

please email me back, i have a s500i and it blinks and nothing come on

By: Arun

Arun — Sat, 09 Jan 2010 09:19:52 +0000

where can i find SE Tool 2 Lite 1.11

By: AMES

AMES — Fri, 01 Jan 2010 21:57:48 +0000

Im so angry, i dont know waht to do. My Phones completely OFF! & there is a flashing red light on the side. Its a k800i. WHAT DOES THIS MEAN. WHAT DO I DOOOO?

By: geet best

geet best — Thu, 31 Dec 2009 08:13:02 +0000

well its all done
good post

By: erni

erni — Wed, 30 Dec 2009 19:45:01 +0000

hi erni here. would also like to add, the red light is still blinking after doing this. what else will you need to know?

By: erni

erni — Wed, 30 Dec 2009 19:28:03 +0000

hi,

my w610i has this red light blinking problem and cant turn on too. tried your method but got the following log. can you kindly advise on how to proceed further.

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition – please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35489401458769 CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can’t read SCRC unit
Elapsed:90 secs.
Elapsed:90 secs.

By: Akshay

Akshay — Wed, 30 Dec 2009 12:22:42 +0000

Haytham, try reflashing FS via 2+5
other wise sorry try some paid tool, this is now all too old.

By: michie

michie — Sun, 27 Dec 2009 16:42:55 +0000

hi my sony erricson only flashes red light ……i used it on night and when i woke up in the morning it doesnot work can you plz help me i m in need i show my phone to customer care they said your gdfs file is corrupt and they are demanding rs1000 says that this file has to be bought from net plz help if u can i m in great need .plz mail me if possible michie19@gmail.com

By: Haytham

Haytham — Mon, 14 Dec 2009 04:20:27 +0000

I tried flashing it using W580_R6BC002_FS_AMERICA_1_RED52.fbn
and this is what i got

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35256002774947 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Users\Alsadeq\Desktop\W580_R6BC002_FS_AMERICA_1_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4180
Will flash 209 blocks…
ldr blk write fail. fatal
Abort all operations.
Can’t get packet properties.
verify block error
last blk:46780000,00010000
Elapsed:141 secs.